Rob Kuijt's Testing Blog
ALM and MBT 
Monday, October 19, 2009, 07:08 PM - ALM, Testing
Posted by Rob Kuijt
Both ALM (Application Lifecycle Management) and MBT (Model Based Testing) are hot. I'm pretty busy running from customer to customer starting/supporting MBT proof of concepts and assignments. With some explanation all my contacts are convinced that the combination of ALM and MBT is THE roadmap for the future.

The advantages of ALM can already be implemented by choosing for the new generation of tools of Microsoft (VSTS2010) and IBM (JAZZ etc.) are presenting to strongly support the collaboration of the different roles in and around the ICT. Model Based Testing has not yet that same level of maturity. Most participants in the Model Based Testing world are very ambitious: They try to Generate Test Cases for direct automatic execution, based on test specific models.

I think this is a bridge to far for most companies using for instance mainly ERP-software. In the ERP-scope most of the testing is still done manually, and jumping to this ultimate form of Model Based Testing (Generate Test Cases for direct automatic execution) will be very tricky and/or costly. That's why we (Sogeti) are introducing also a basic form of Model Based Testing (STaaS/COVER), using the same models as the developers do.


"MBT: ...a bridge to far..."


MBT: Generate Test Cases for direct automatic execution
Does this mean that Generating automated tests is a dead end? NO! It is a very good approach for testing high risk functionalities, which are to risky or to complex to test manually.
Making test specific models is a costly business and top designers/test engineers are needed to make it work. So be sure to pinpoint these heavy coverage and tooling only on the high risk areas. AND!! Do not try to make the test specific models in the Testing Silo! Look for collaboration with the design department to get these test specific models in the same configuration mnagement as the models the devlopers use to build the software. Preferably in an "ALM Center Configuration Management".

MBT-basic: Using the same models as the developers do
On the other hand, when the ambition of Model Based Testing is lowered to only generating the test cases, it is a complete different story. Especially the generation of the (more global) logical test cases can be done from the same (functional and/or requirement) models the developers use as a bases for creating the software. For instance process flows (activity diagrams), decision tables and pseudo code are a perfect basis for generating (logical) test cases.
Enrichment of these models (in collaboration with the design department) will bring us to the next step: Generating the physical test cases. In that case the Test Cases are no longer Configuration Items (costly maintenance!) but Test Cases become Work Items (if desired: directly generated from the same models the developers use to build the software).

Rob Kuijt

2 comments ( 429 views )   |  0 trackbacks   |  permalink   |   ( 2.9 / 3686 )
ALM: the end of the whispering game 
Saturday, October 17, 2009, 08:35 PM - ALM, Quality, Fun
Posted by Rob Kuijt
Who don't know the whispering game? For me it was one of my favourite games in my childhood. Whispering a tricky word in the ear of the child next to you and waiting for the twisted result at the end of the cycle....

Nowadays not only children do play this game. In the ICT world practically everyone is playing this game. Only they invented a new name for it: The Waterfall Model .



ALM (Application Lifecycle Management) makes an end to the twisted results of this widely implemented whispering game. Instead of working in Silos with their own project and configuration management, in ALM the requirement, workflow and configuration management is organized in the center of the process. So everybody is working on the same artifacts.



In ALM everbody is working on the same artifacts. No whispering risks at all.. ;-)

And from my archive..
Some famous twisted results of the whispering game:






add comment ( 331 views )   |  0 trackbacks   |  permalink   |   ( 3 / 3032 )
Model-Based Testing is not "Only Fun" anymore.... 
Saturday, June 20, 2009, 02:09 PM - ALM, Quality, Testing, TMap®, Fun
Posted by Rob Kuijt
For several years now, Model-Based Testing is mainly used within the (technical) development processes. In the Black Box testing community it was still "just a theory", and in my case: fun to play with. Today is different! I'm completely into Model-Based Testing nowadays. MBT turned, for Black Box testers, into serious business!

Wikipedia:
Model-Based Testing is software testing in which test cases are derived in whole or in part from a model that describes some (usually functional) aspects of the system under test (SUT).


For quite some years I'm working with a tool called COVER. Initially COVER was build to help lazy testers, like me, to avoid boring manual activities…and it worked! Using this tool I could easily amaze my surrounding with stunning Speed and Quality. Especially deriving test cases from formal specifications like pseudo code or activity diagrams was fun to do; instead of "solving a boring puzzle" time, it was done in seconds (as a matter of speaking). However, most of the testers in my surrounding didn't recognize the ease of this way of working (or were not lazy enough?) so COVER didn't have much users.

Today is different. The attention for Model-Based Testing is growing rapidly. Previously, when a project had to make test cases, it was accepted that it was done manually and, everybody knew, it should take quite some time.
Today the budgets are lowered...What to do?...Less productivity?
My suggestion: When you've less money to spent, be creative to get the same results!

First Model then Test!


Model-Based Testing is a nice example of creative thinking!
Within a few months the relatively unknown possibilities of Model-Based Testing tools became very popular for Black Box testers within Sogeti. Especially the collaboration-part (designers working together with testers) of Model-Based testing is an eye opener. Everybody knows that it is smart to find defects as early as possible, but it is very difficult to motivate teams to perform good design inspections. Now MBT tools like COVER can do a big part of those intensive inspections, because using the models for generating test cases will directly show the defects in those models in a very early phase of the project! And beside that, it generates a big part of the test cases!

So, when the Designers create models that COVER understands, projects will perform Better, Faster and Cheaper! ....and it works!
Some (early) successes from our proof-of-concepts and implementations:
  • The amount of time needed for creating test cases dropped 50% (and sometimes more);
  • The maintenance of the (regression) test cases became in average 70-80% cheaper;
  • And maybe most important: We have proved to find defects much earlier than the project did manually!

Collaboration will change the world of testers!
Using MBT is in fact collaborating within the Application Lifecycle [ALM] supported by standardization and automation. Many defects, found in functional testing, have their origin in misinterpretations and assumptions of the requirements and/or specifications. The early usage (generating test cases) of formal models, just after or during the design phase, will create a much more solid base for software coding. For the testers this will mean less and less defects, so besides the generated test cases, the improved quality of the software will also fasten the test process.
(PS. When both software and test cases are generated from the same models, be sure that the test objective is clear!)

This industrialization can’t be stopped anymore. The time of creating most test cases by hand has had its peak. Of course, not all test cases can be generated, and also manual testing itself will never disappear, but handcrafted test cases will be less and less common practice. The work of Black Box testers will, in my opinion, shift in two directions: 1) Earlier in the life cycle: joined modeling and helping and supporting development to find defects as early as possible (Master Test Plan consultancy), or 2) the coming market End-to-End testing: the importance of complete chains of applications is growing rapidly. End-to-End Testing will become a separate specialism.

Examples
Back to Model-Based Testing: To give an idea what type of models can be used, and how test cases are generated, I've made a some slides (with examples) about the Sogeti MBT tool: COVER. Look for yourself if MBT will affect your work!

It did affect mine!
;-)
Rob Kuijt
1 comment ( 280 views )   |  0 trackbacks   |  permalink   |   ( 3 / 4792 )
Visual Studio Team System 2010 - Episode 4: Quality Check 
Friday, April 24, 2009, 10:04 AM - ALM, Quality, Testing, TMap®, Rosario
Posted by Rob Kuijt
In this episode I will discuss the different practices around the Quality Check in order to do this important check for ALM as efficient and effective as possible.

Previous episodes:
Visual Studio Team System 2010 - Episode 1: A Focus on Testing
Visual Studio Team System 2010 - Episode 2: No Risk No Test
Visual Studio Team System 2010 - Episode 3: The Lifecycle

In the last episode Clemens talked about the support VSTS2010 will give on the collaboration at artifact level. Different roles in the lifecycle work together on artifacts. Each of them adds their knowledge, vision and ideas to the solution from their view point. These artifacts are accessible by every role in every phase of the project, adding value throughout the lifecycle. People are enabled to collaborate, making applications together, and not only by telling what they are doing but most important by working seamless together on the application.


TMap® Quality Check
A subsequent measure for increasing the quality of the developed artifacts is an evaluation activity: for instance the review.

The review is a method of improving the quality of an artifact by evaluating the work against the requirements and/or guidelines and subjecting it to peer review.

The review on the requirements and/or design can be carried out as a static test activity before the coding starts.
In the review, the following points can be checked, independently of the set requirements:
1. Has the artifact been realized in accordance with the assignment? For example, are the requirements laid down in the technical design realized correctly, completely and demonstrably?
2. Does the artifact meet the following criteria: internally consistent, meeting standards and norms and representing the best possible solution? ‘Best possible solution’ means the ‘best solution’ that could be found within the given preconditions, such as time and finance.
3. Does the artifact contribute to the project and architecture aims? Is the artifact consistent with other, related artifacts (consistency across the board)?
4. Is the artifact suitable for use in the next phase of the development?

Why?
Like testing, the Quality Check is a measure to provide insight into the quality of delivered products and the related risks when taken into the next phase of the lifecycle. If the quality is inadequate timely measures can be taken, such as rework by the designers. However, there is never an unlimited quantity of resources and time. In theory it is important to relate the Quality Check effort to the expected risks. A pragmatic approach to determine the Quality Check effort is to look at some past projects and answer the question:

"How many defects, detected in Acceptance Tests, could have been found much earlier, if we had done a Quality Check? (According to the above points)"
In my experience 10-20% of the defects could have been found much earlier in the lifecycle when the Quality Check was done properly. And because defects in the Acceptance Test are quite expensive, you only have to find 1 or 2 serious defects in the Quality Check to make it economic worthwhile. So my strong recommendation is:

7 Hints and tips
1. Performing a good Quality Check is a kind of inborn specialization. Find a person who is good in recognizing texts with high potential risk on assumptions and or interpretation errors. In other words: find a pencil-pushing, nit-picky quality geek!
;-) Most professional testers are proud to have these qualifications.

2. Before checking an artifact: What is the quality of its source? Is the source of the AUC (Artifact Under Check) ready? authorized? stable? If not, consider to do also a check on the source of the artifact to quantify the possible changes in the (near) future,

3. If a previous version of the artifact is available, and the quality of that version is known: make use of a so called Comparison Tool to find and check the differences. AND! Check always the consistency of the “change register”, especially when the “change register” is used in the next phase to implement the changes.

4. Combine the Quality Check with the estimation activity for the next phase. If the estimation is done by another person, let them work together!

5. Use a checklist as a reference! For your own protection, a checklist prevents that too much attention is paid to the use of standards and correct spelling or even to these aspects alone (This can be a cause of friction among the various people involved.) Partly owing to the diversity of design techniques and information sources that, it is not possible to create one general checklist per artifact type. Therefore, checklists should be created specific to the situation per organization and per project. Of course you can use examples like Testing Requirements or Testing Use Cases as a start for the creating of your checklist.

6. Make always clear what checks you will perform. By communicating your checklist you can prevent a lot of misunderstandings on later findings.

7. Audi alteram partem (hear the other side). Don't report on findings/defects without a fair hearing in which the author of the artifact is given the opportunity to respond to the "accusations" against his work.

Collaborate
For some, it is very tempting to do a review in their own silo: Get the stuff to check, find as much as defects as possible, receive applause for the prevented damage and do that over and over again……
Wrong! Don’t be a Scrooge! (see my blog: "Does Scrooge exist?") An essential part of the Quality Check is the Learning Cycle. By performing Quality Checks the quality of future AUC’s (Artifacts Under Check) must grow. So collaborate with the designer, information analyst or whoever made that artifact, and get your applause on the better quality of artifacts instead on the number of defects.

In the next episode Clemens will explain how the tools support the Quality Check, as well as the collaboration around it, to get the optimum results.




add comment ( 207 views )   |  0 trackbacks   |  permalink   |   ( 3 / 2320 )
Visual Studio Team System 2010 – Episode 2: No Risk No Test  
Tuesday, February 10, 2009, 08:08 PM - ALM, Quality, Testing, TMap®, Rosario
Posted by Rob Kuijt
In episode 1, Clemens introduced the focus of Visual Studio Team System 2010 on the collaborative effort between the tester and the other roles in the application lifecycle. In this second episode I will start with a short introduction on testing.

Testing is not an aim in itself! Testing is, in fact, a balancing act. What risks must be covered, what results are to be delivered and how much time and money can be spend, based on rational and economic grounds?

The right test strategy will balance among risks and costs .


Testing supplies insight in the difference between the actual and the required status of an object. Where quality is roughly to be described as 'meeting the requirements and expectations', testing delivers information on the quality.

In this, there is no difference for developers who are testing, specialist testers during system testing or generalist testers during the final acceptance test. Choosing the right test strategy is a joined effort between every tester and the other roles in the application lifecycle. This collaboration is needed because, beside insight in the business risks, much (technical and test) knowledge is needed to find the most important defects as early as possible at the lowest price.

The collaboration doesn't stop after choosing the best test strategy. After designing the test cases, also test execution must be organized as a joined effort. Collaboration between the different roles in the application lifecycle is not self-evident. By nature, it looks like developers and testers don't (want to) understand each other. Having this attitude, it is difficult to find out you need each other to deliver software of good quality.

...don’t (want to) understand each other.


The consequence of this virtual (and sometimes real) wall is calamitous for quality. Many bugs arise by doing wrong assumptions and interpretations of the, in generally, unclear specifications and requirements. Reporting, analyzing and resolving these bugs take a lot of time, especially when they prove to be not reproducible or wrong.

An Example: After a development project of 5 man year, testing is done by a team of generalist testers. With much enthusiasm the test team executes the test cases they designed during the building of the system. After 3 months the verdict is given: Negative release advice, because of (8) blocking and (22) big defects, the test team gives the advice NOT to go into production. As you may understand this was a big disappointment for both the project team as the business department. A taskforce was established to keep the delay (damage) in control. After the defect analysis the general feeling became better, after filtering the test faults (20%), the functional wishes (20%) and changes (not passed through to the testers; 30%) the repair costs were approximately 200 hours ( for the remaining 30%). In fact the development team had done a great job. Better communication from both sides, before and during test execution, probably had made the verdict a, celebration worthy, positive release advice. Much, much better than this cold shower!

The above paragraphs show that the collaboration between the tester and developer is important for success. If the collaboration between the different roles in the application lifecycle is not actively stimulated and facilitated, the proverbial wall will arise.

In the next episode Clemens shows us how Visual Studio Team System 2010 will support and stimulate this collaboration...

add comment ( 177 views )   |  0 trackbacks   |  permalink   |   ( 3 / 3788 )

<Back | 1 | 2 | 3 | 4 | 5 | Next> Last>>